Piomb Block Station Displays; Detail Displays And Faceplate Names; Calling Up The Displays; Detail Displays Tabs - Honeywell Experion PKS User Manual

9.7 PIOMB block station displays

Related topics
"Detail displays and faceplate names" on page 227
"Calling up the displays" on page 227
"Detail displays tabs" on page 227

9.7.1 Detail displays and faceplate names

The following table lists the names of the details display and faceplate of the PIOMB block.
Tab Name
Main tab
Channels tab
Config Details tab

9.7.2 Calling up the displays

The following table lists the actions that you must perform to call up the PIOMB block detail displays.
To call a PIOMB block...
Main tab display
Channel tab display
Config Details tab display Click the Config Details tab.

9.7.3 Detail displays tabs

Main tab
The Main tab detail display provides information such as the execution and control, I/O module information,
display information, and QVCS information.
Detail Display
sysdtlPIOMBa.htm
sysdtlPIOMBb.htm
sysdtlPIOMBc.htm
Then ...
Type the PIOMB point name (for example PIOMB_132) in the Station command zone and
press F12.
You can also click the Search
OK.
Click the Channels tab.
9 PROFIBUS I/O MODULE (PIOMB) FUNCTION BLOCK
Faceplate
sysdtlPIOMBa_fp.htm
icon in the Station toolbar and type the point name and click
227