Loading A - Honeywell Experion PKS User Manual

11 LOADING PROFIBUS GATEWAY MODULE (PGM)
11.2 Loading a PGM
You can use the following general procedure to load a PGM. The load procedure is similar for all PGM module
components. Note that selecting a PGM for loading also selects the associated PB function blocks.
Perform the following steps to load a PGM function block and its associated blocks
1 Click the PGM block you must load in the Project view.
2 Click Tools > Load.
•
You can also click
• You can also right-click the PGM block and select Load.
The Load dialog box appears.
3 With the Load check box selected, click OK.
This initiates the PGM load operation and the load progress dialog box appears.
After the load operation is complete and the Load dialog box closes, click the Monitoring tab.
4
The PGM icon appears in the Monitoring view.
240 www.honeywell.com
in the tool bar.
Attention
If errors are detected, they are displayed in the Load progress dialog and you will be asked if you want to continue
the load or cancel, depending on the nature of the error. We suggest that you cancel the load and identify and fix
the errors. Each message contains a brief description and includes an error code in parentheses. Note the last
number in the string. In some cases, more information about the code number may be included in the Control
Builder Notifications Reference document. .