Grouping Adjacent Modules Into One Logical Module - Honeywell Experion PKS User Manual

6 PROTOCOL BLOCK
Option name
Remaining free
memory

6.6.3 Grouping adjacent modules into one logical module

Perform the following steps to group adjacent modules in to one logical module.
Attention
Refer to the "Guidelines for grouping modules"section before grouping modules.
1. Click the Field Network Configuration tab of the Protocol Block configuration form.
2. Double-click the master in the Network view.
3. Click Address Management in the Navigation area.
The Address Management page appears.
4. Click
5. Select the adjacent modules that must be grouped into one logical group.
The following figure displays a sample Address Management page in which two adjacent modules are
selected for –––grouping.
6. Click Group selected modules.
After the modules are grouped, a virtual tag name is automatically assigned to the grouped logical module.
You can modify the tag name as required.
82 www.honeywell.com
Description
Displays the remaining reserved bytes for the slave.
to view the input and output modules associated with the specific device.