Load Ribbon - Honeywell PM23c User Manual

Chapter 2 – Set Up the Printer

Load Ribbon

36
1 Open the media cover.
2 Turn the printhead lift lever counterclockwise to raise the printhead.
3 Slide the ribbon roll onto the ribbon supply hub and slide the empty
ribbon core onto the ribbon takeup hub.
4 For ribbon that has the ink wound out, place the ribbon on the supply
hub with the ribbon wound clockwise. For ribbon that has the ink
wound in, place the ribbon on the supply hub with the ribbon wound
counterclockwise.
PM23c, PM43, and PM43c Mid-Range Printer User Manual