Table of Contents
Advertisement
Chapter 3 – Connect the Printer
Connect the Printer Using a USB Cable
About the Parallel Port
Connect the Printer Using an IEEE 1284 Cable
How to Connect the Printer to Your Network
46
Intermec recommends that you only connect one printer to your PC,
either directly or through a hub. You do not need to set up any parameters
for USB communications.
1 Download and install the InterDriver software on your PC.
2 When prompted, connect one end of the USB Type A cable to the
back of the printer and connect the other end to your PC.
If you want to use a parallel port on the printer, you can choose to have
the IEEE 1284 parallel port installed either at the factory or by an
authorized Intermec service technician. You can use the parallel port with
InterDriver. The parallel port supports Universal Plug and Play (UPnP),
compatibility, nibble, byte, ECP, and additional status reporting through
IEEE 1284 nibble ID mode.
If you are using a parallel port to communicate with the printer, you need:
•
an IEEE 1284 interface adapter installed in the printer.
•
a parallel cable to run between the printer and the PC.
You can connect the printer to your PC using an IEEE 1284 cable if you
have the parallel port option installed in your printer.
Note: You must configure all printer settings through the printer Main
Menu, the printer web page, or with PrintSet 5 and a USB connection
before you use the parallel connection to the printer.
1 Connect one end of the IEEE 1284 cable to the interface adapter port
on the back of the printer.
2 Connect the other end of the cable to to parallel port on the PC.
You can connect the printer to your network using the:
•
Ethernet interface.
•
Wi-Fi + Bluetooth wireless interface.
These network interfaces provide features such as security, FTP server,
web page, and Alert handling.
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Advertisement
Table of Contents
