Upgrade Firmware From The Printer Web Page; Upgrade Firmware From A Usb Storage Device - Honeywell PM23c User Manual

Chapter 5 – Troubleshoot the Printer

Upgrade Firmware from the Printer Web Page

Upgrade Firmware from a USB Storage Device

96
You can upgrade the printer firmware from the printer web page. To
configure the printer from the web page, the printer must be turned on and
connected to your Wi-Fi or Ethernet network.
1 Start a web browser on your desktop PC.
2 In the address field, type the printer IP address and press Enter. The
printer web page appears.
3 Click Login in the upper right corner of the screen. The Login page
appears.
4 Type your Username and Password in the text fields and click
Login.
5 Click the Services tab and then select Firmware Upgrade. The
Firmware Upgrade screen appears, showing the current firmware
version.
6 Click Browse to locate the upgrade file, select it, and then click Open.
7 Click Upgrade. The printer web page shows that it is upgrading
firmware on your printer.
You can upgrade the printer firmware from a USB storage device. You
must place the upgrade file in the root directory on the USB storage
device.
Note: For best results, Intermec recommends using a USB storage
device that contains no other files besides the upgrade file.
1 Copy the firmware upgrade file to the root directory of the USB
storage device.
2 Turn the printer off.
3 Insert the USB storage device into a USB host port.
4 Restart your printer. An upgrading firmware message appears as the
upgrade file is loaded into the printer memory. This process may take
a few minutes.
5 Remove the USB storage device.
PM23c, PM43, and PM43c Mid-Range Printer User Manual