How to Adjust the Printer
Prevent Ribbon Wrinkling
PM23c, PM43, and PM43c Mid-Range Printer User Manual
You may need to adjust your printer to accommodate how you are
printing or to improve printer performance. You can make these
adjustments on the printer:
•
Ribbon wrinkling
•
Printhead balance
•
Printhead pressure
•
Label taken sensor
•
Label gap sensor and label mark sensor
If you have problems with the thermal transfer ribbon getting wrinkled, try
adjusting the ribbon tension bar.
1 Open the media cover.
2 Use a large straight-slot screwdriver to adjust the ribbon tension bar:
•
Turn the tension bar screw clockwise to move the bar backward
and decrease the tension.
•
Turn the tension bar screw counterclockwise to move the bar
forward and increase the tension.
Chapter 6 – Maintain the Printer
103