Ethernet Settings - Honeywell PM23c User Manual

Ethernet Settings

PM23c, PM43, and PM43c Mid-Range Printer User Manual
Serial Port Settings (continued)
Setting
XON/XOFF To
XON/XOFF From
New Line Character Defines the characters that the printer
This section describes the Ethernet IPv4 and IPv6 settings. To view these
settings:
• From the printer Main Menu, select Settings > Communications >
Ethernet.
• From the printer web page, click the Configure tab,
Communications > Ethernet.
Ethernet Settings
Setting Description
(IPv4) IP Specifies how the printer obtains an
Assignment IP address.
Method
(IPv4) IP Specifies the unique network-level
Address address that is assigned to each
device in a TCP/IP network (IPv4).
Subnet Mask Specifies a number that defines the
range of IP addresses that can be
used in a TCP/IP network.
Default Router Specifies the IP address of a router
that is used when a device sends a
packet to another subnet or to an
unknown destination.
DHCP Response Specifies if the printer receives
DHCP responses by broadcast or
unicast.
Description
Specifies if software flow control (XON/
XOFF) is used to manage the rate of
data transmission to the host.
Specifies if software flow control (XON/
XOFF) is used to manage the rate of
data transmission from the host.
echoes to the host to indicate that it has
moved to a new line.
Appendix B – Default Settings
Default
Disable
Disable
CR/LF
Default
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
Broadcast
127