Table of Contents
Advertisement
System Maintenance Alert Settings
PM23c, PM43, and PM43c Mid-Range Printer User Manual
This section describes the system maintenance alert settings, such as the
odometer distance. To view these settings:
•
From the printer Main Menu, select Settings > System Settings >
Maintenance Alerts.
•
From the printer web page, click the Configure tab, System Settings
> Maintenance Alerts.
System Maintenance Alert Settings
Setting
Odometer (User
Resettable)
Odometer (Printer) Sets the length of media (in meters) that
Odometer
(Printhead)
Replace Printhead Sets the length of media (in meters) that
Clean Printhead
Description
Sets the length of media (in meters) that
the printer prints before the Odometer
(User Resettable) alert is sent, if this alert
is configured. Unit of measurement is
defined in the Unit of Measure parameter.
Range is 0 to 4294967295.
the printer prints before the Odometer
(Printer) alert is sent. Unit of measurement
is defined in the Unit of Measure
parameter. Range is 0 to 4294967295.
Sets the length of media (in meters) that
the printer prints before the Odometer
(Current Printhead) alert is sent, if this
alert is configured. Unit of measurement is
defined in the Unit of Measure parameter.
Range is 0 to 4294967295.
the printer prints before the Replace
Printhead alert is sent, if this alert is
configured. Unit of measurement is
defined in the Unit of Measure parameter.
Range is 0 to 4294967295.
Sets the length of media (in meters) that
the printer prints before the Clean
Printhead alert is sent, if this alert is
configured. Unit of measurement is
defined in the Unit of Measure parameter.
Range is 0 to 4294967295.
Appendix B – Default Settings
Default
0
0
0
0
0
143
Advertisement
Table of Contents
