About Ribbon - Honeywell PM23c User Manual

About Ribbon

PM23c, PM43, and PM43c Mid-Range Printer User Manual
8 Configure the cutter:
• If you have an icon printer, use PrintSet 5 or a printer command
language to configure the cutter.
• If you have a full touch printer, continue with the next step.
9 After the printer finishes starting up, press
10 Select Settings > Printing > Cutter.
11 In the Cutter Control options, select Automatic.
You can also enable Partial Cut from the Cutter menu.
12 Press to save your settings.
13 Configure the start and stop adjust settings.
Thermal transfer printing provides a durable printout that is less
vulnerable to chemicals, heat, and sunlight than direct thermal printing.
Make sure you select a ribbon type that matches the media you are using
and that you configure the printer for thermal transfer media.
The printer supports thermal transfer ribbon rolls with the ink-coated side
facing either inward or outward. To determine which type of ribbon you
have, place the ribbon on a piece of paper as shown, and use a pen or
other sharp object to scratch the ribbon. If you see a mark on the paper,
your ribbon is wound ink out.
Determining Whether Your Ribbon is Wound Ink In or Ink Out
Chapter 2 – Set Up the Printer
.
35