Table of Contents
Advertisement
Appendix B – Default Settings
Wireless 802.11 General Settings
128
Ethernet Settings (continued)
Setting
Description
(IPv6) IP
Specifies how the printer obtains an
Assignment
IP address (for IPv6 networks).
Method
(IPv6) IP
Specifies the unique network-level
Address
address that is assigned to each
device in a TCP/IP network (IPv6).
This section describes the 802.11 general settings. To view these
settings:
•
From the printer Main Menu, select Settings > Communications >
Wireless 802.11 > General.
•
From the printer web page, click the Configure tab,
Communications > Wireless 802.11.
Wireless 802.11 General Settings
Setting
Description
Network
Defines the wireless network. To
Name
communicate, all access points and
(SSID)
wireless devices must have the same
network name, which is case-sensitive.
Network
Selects the radio behavior of the printer.
Type
Ad Hoc mode allows the printer to
communicate directly with another printer.
Infrastructure mode allows the printer to
communicate through an access point.
Roaming
Controls the roaming inclination of the
printer. The higher the level, the less
inclined the printer is to switch access
points based on the printer received signal
strength (RSSI).
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Default
Automatic
Automatic
Default
HONEYWELL
Infrastructure
Off
Advertisement
Table of Contents
