Table of Contents
Advertisement
Chapter 3 – Connect the Printer
About Bluetooth Communications
50
3 Transfer your certificate to /home/user/certificates/public.
4 On your PC, open a Telnet session to the printer.
5 Change the directory to: /home/user/certificates/public.
6 Type this command:ls -la.
You should see the certificate that you transferred in Step 3.
7 Use the certinstall script to install the certificate using this format:
<prompt> certinstall.sh <certificate name>
Example:
itadmin@PM23-00000000073 /home/user/certificates/public$
certinstall.sh entrust.cer
8 When you receive confirmation that the certificate was installed, type
this command to make sure you see a .pem file and another soft link
to the same file: ls -la.
9 Use the printer web page, the Main Menu on a full touch printer, or
PrintSet 5 to specify the certificate .pem file to use for security.
The printer supports Bluetooth communications when the optional
Wi-Fi+Bluetooth module is installed. When Bluetooth is enabled, you can
use a Bluetooth bar code scanner to send scanned data directly to a
Fingerprint application. You can also make the printer discoverable by
other Bluetooth devices, and enable security if required.
You can set up Bluetooth communications:
•
from the printer web page.
•
from the printer Main Menu.
•
using Intermec PrintSet through a USB connection to a PC.
Connect to a Bluetooth Device
If your printer has the full touch display, you can use the Bluetooth wizard
to discover and connect to an HID Bluetooth device such as a keyboard
or a Bluetooth scanner configured as an HID slave.
1 Make sure your Bluetooth device is turned on and discoverable, and
that the device is in range of the printer.
2 From the printer Ready screen, select the Main Menu.
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Advertisement
Table of Contents
