Honeywell PM23c User Manual page 41

PM23c, PM43, and PM43c Mid-Range Printer User Manual
Route the Liner Around a Collapsible Core (PM43, PM43c)
7 Pull the liner tight and push the label dispenser lever back into the
closed position.
8 Turn the printhead liftlever clockwise to close the printhead.
9 Close the media cover.
10 Press the Print button to advance the media.
11 Configure the printer for the correct media type (media with gaps,
black mark, continuous fixed length, or continuous variable length).
12 Calibrate the sensors on the printer. You can calibrate the media from
the Main Menu (Wizards > Calibration > Media) on a full touch
printer or from the web page (Services > Media Calibration) for all
models of the printer.
Chapter 2 – Set Up the Printer
31