Ribbon Adjust Sub Assembly - Honeywell PM42 Service & Repair Manual

TITLE
PM42 Service Repair Manual

Ribbon Adjust Sub Assembly

OPERATION:
The purpose of the ribbon adjust assembly is to adjust the ribbon alignment for ribbon wrinkle for printers with thermal
transfer ribbon option. Direct thermal printer will not have the ribbon adjust sub-assembly.
Tools Required
Description
Torx Driver T20
Parts Required
Item Part Number
1 50125922-001FRE
2
3
Ribbon Adjust Assembly Replacement
1. Remove the torx screw securing the ribbon adjust assembly.
2. Slide the ribbon adjust assembly toward the electronics and gears side to remove from the spine (main deck).
3. Reverse the instructions for re-installation.
Model
L3-GLBL-RPR-3872
PM42
(Rev A)
Description
FRE, Assy, Ribbon Adjust Sub, PM42 (include screws, washer, rod, and
plate)
DOCUMENT NO.
Page 27 of 48
Torx screw
Ribbon Adjust Sub Assembly, Spare
PAGE
1
L3-GLBL-RPR-3872 (Rev A)
Qty
1