Honeywell PM23c User Manual page 30

Chapter 1 – About the Printer
20
PM23c, PM43, and PM43c Options and Accessories (continued)
Option or
Accessory
Airline Baggage Tag PM23c,
Door with Bubble Top PM23c
Collapsible Core
Cutter
Cutter Tray
Door with the Dome
Cover
Dual USB Host Port
Board
DUART Board
Extended Base with
Full Label Roll
Rewinder
Industrial
Interface+UART
board
Label Dispenser with
Rewinder and Label
Taken Sensor
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Supported
Printer Description
Use the airline media guides and
PM43c filler to easily load baggage tags in
your printer.
Use the bubble door when printing
baggage tags on a roll and you need
to have media fully covered.
PM43, Use the collapsible core accessory
PM43c to easily remove ribbon from the
takeup hub.
PM43, Use the cutter option to cut media
PM43c into individual labels.
PM43, Use the optional cutter tray
PM43c accessory to collect the cut-off
labels.
PM23c, Use the dome cover to
PM43c accommodate rolls of media up to
212.725 mm (8.375 inch) outside
diameter and protect the inside of
the printer from dust and debris.
PM23c, Use the dual USB host port board to
PM43, add the ability to connect multiple
PM43c USB devices to the printer.
PM23c, Use the DUART board to add two
PM43, UART ports on the back of the
PM43c printer.
PM43 Use the extended base option with
the PM43 printer to be able to rewind
a full roll of labels.
PM23c, Use the Industrial interface + UART
PM43, board to make a UART port on the
PM43c back of the printer.
PM23c, Use the label dispenser to peel
PM43, labels from the backing and present
PM43c the labels one at a time for
application.