Table of Contents
Advertisement
Appendix B – Default Settings
Wireless 802.11 Security Settings
130
Wireless 802.11 Network Settings (continued)
Setting
Description
Default Router
Sets the IP address of a router that is
used when a device sends a packet
to another subnet or to an unknown
destination.
DHCP Response Sets if the printer receives DHCP
responses by broadcast or unicast.
(IPv6) IP
Sets how the printer obtains an IP
Assignment
address (for IPv6 networks).
Method
(IPv6) IP
Sets the unique network-level
Address
address that is assigned to each
device in an IPv6 network.
This section describes the 802.11 security settings. To view these
settings:
•
From the printer Main Menu, select Settings > Communications >
Wireless 802.11 > Security.
•
From the printer web page, click the Configure tab >
Communications > Wireless 802.11.
Wireless 802.11 Security Settings
Setting
Description
Security Type
Selects the protocol the radio uses
to verify its identity and makes sure
that it is authorized to communicate
on the wireless network.
Association
Selects the security method that
the radio uses to get access to the
wireless network.
Pre-Shared Key Defines the passphrase that allows
the radio to authenticate over the
wireless network (for both WPA
and WPA2 security). Range is 8 to
64 characters.
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Default
0.0.0.0
Broadcast
Automatic
Automatic
Default
None
Open/WEP
None
Advertisement
Table of Contents
