Table of Contents
Advertisement
Chapter 2 – Set Up the Printer
Connect the Printer to Power
24
The full touch printer goes through a startup wizard the first time you turn
on the power. The icon printer goes through an LED startup sequence the
first time you turn on the power.
1 Connect one end of the power cord to the back of the printer and
connect the other end to AC power.
2 Press the power switch to turn on the printer. As the printer starts up:
•
a progress bar appears on the full touch interface. When the
printer has finished starting up, the startup wizard appears. After
you complete the startup wizard, you can choose to complete
more wizards or you can go to the Ready screen.
•
the icons turn on and then turn off one at a time on the icon printer.
When the printer has finished starting up, the blue Ready-to-Work
indicator turns on and stays on.
•
if Power Up Action is set to Smart Calibration, the printer calibrates
media type, printing method, and media length.
If a condition occurs that will prevent printing, the Ready-to-Work
indicator blinks.
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Advertisement
Table of Contents
