Table of Contents
Advertisement
Chapter 4 – Configure the Printer
Install a Configuration File from a USB
Storage Device
74
Programming Commands to Load a Printer Profile
Connection
Programming Commands
Printer running
RUN "/system/usr/bin/cfg -o xmlimportset -k /home/
Fingerprint
user/profiles/myprofile"
Printer running
<STX><ESC>.x,/system/usr/bin/cfg -o xmlimportset
IPL
-k /home/user/profiles/myprofile<ETX>
Telnet connection
/system/usr/bin/cfg -o xmlimportset -k /home/user/
over Port 23
profiles/myprofile
After you save an .xml configuration file to a USB storage device, you can
install it on the printer at any time.
Note: If there is more than one configuration file on the USB storage
device, the printer imports the first file found in alphabetical order by file
name.
1 Insert the USB storage device in the printer USB host port.
2 From the Ready screen, press the Main Menu button. The Main Menu
appears.
3 Select Tools > USB Menu.
4 Select Configuration.
5 Select Install Configuration. The printer imports the configuration
file.
•
For most printer languages, the configuration file is imported
directly into the working configuration and is not copied to the /
config directory.
•
An IPL configuration file is copied to /home/user/config/ipl.
6 Press OK when the confirming message appears.
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Advertisement
Table of Contents
