Inserting The Ribbon - Honeywell PC42t User Manual

HONEYWELL PC42t User Guide
2.3.2

Inserting the ribbon

1. Open the printer cover and insert one plastic adapter into an empty ribbon takeup core and
the other one into the ribbon core. Place both between the holders, as pictured below.
2. Raise the ribbon mechanism and feed the ribbon through the opening and on the outer
side onto the empty core. Attach the beginning of the ribbon to the empty core and turn
the slack wheel until you get to the black part.
3. Close the ribbon mechanism. Push on it from above until it clicks into place.
4/13 © IZUM, 6. 3. 2018, SPO-NA-EN-316, V1.0
SPO