Calibrate The Label Taken Sensor; Adjust The Label Gap And Black Mark Sensor - Honeywell PM23c User Manual

Chapter 6 – Maintain the Printer

Calibrate the Label Taken Sensor

Adjust the Label Gap and Black Mark Sensor

106
If your printer has the optional label taken sensor or the label dispenser
(which includes the sensor), use the wizard to calibrate the sensor for
your media.
Note: For best results, calibrate the sensor each time you load media or
move the printer to a different environment. If you installed the label taken
sensor module or the label dispenser in the printer, calibrate the sensor
before you begin printing.
Before you calibrate the sensor, load media and ribbon in the printer as
necessary.
1 In the Main Menu, select Wizards > Calibration > Label Taken
Sensor.
2 Follow the prompts to calibrate the sensor.
The label gap sensor is a transmissive sensor that controls how the
printer feeds media by detecting gaps between the labels. The black mark
sensor is a reflective sensor that detects black marks on continuous
media.
The sensor contains a blue LED which is strong enough to see through
media. You can use the blue LED to help determine the proper location
for the sensor.
PM23c, PM43, and PM43c Mid-Range Printer User Manual