Clean The Exterior Of The Printer; Clean The Cutter; Replace The Printhead - Honeywell PM23c User Manual

Chapter 6 – Maintain the Printer

Clean the Exterior of the Printer

Clean the Cutter

Replace the Printhead

100
Make sure to keep the exterior of the printer clean. Maintaining a clean
exterior will reduce the risk of dust or foreign particles reaching the inside
of the printer and affecting printer functionality.
• Use a soft cloth, possibly moistened with water or a mild detergent,
when cleaning the printer exterior.
Make sure to keep the surface surrounding the printer clean as well.
You should clean the cutter every time you clean the printhead. It is
important to keep the cutter clean to prolong the life of the cutter.
1 Turn the printer off and disconnect the printer from power.
2 Open the cutter door.
3 Use a swab soaked in isopropyl alcohol to clean the cutter opening.
4 Once the cutter is dry, close the cutter door, reconnect power, and
turn on the printer.
You need to replace the printhead periodically when it wears out due to
the rapid heating and cooling process used during printing. How often you
need to replace the printhead depends on factors such as what type of
images you print, the type of media or ribbon you use, the amount of
energy to the printhead, the print speed, and the ambient temperature of
the room you print in. The firmware detects the new printhead when you
restart the printer.
1 Turn the printer off and disconnect the printer from power.
2 Open the media cover.
3 Remove the media and ribbon (if installed).
4 Turn the printhead lift lever counterclockwise to raise the printhead.
PM23c, PM43, and PM43c Mid-Range Printer User Manual