Honeywell PM23c User Manual page 111

PM23c, PM43, and PM43c Mid-Range Printer User Manual
5 Detach the magnetic pressure arm from the printhead bracket and
disconnect the two cables from the printhead as you remove it from
the printer.
6 Connect the two printhead cables to the new printhead.
7 As you insert the new printhead bracket into the printer, make sure the
metal arms on the printhead go around the magnetic pressure arm
bar. Attach the magnetic pressure arm to the printhead.
8 Replace the media (and ribbon) in the printer.
Chapter 6 – Maintain the Printer
101