Table of Contents
Advertisement
About Test Labels
PM23c, PM43, and PM43c Mid-Range Printer User Manual
5 Route the ribbon through the print mechanism and pull out
approximately 20 cm (8 inches) of ribbon leader.
The dotted line in this illustration shows how to load ribbon with the ink
wound in.
6 Turn the ribbon takeup hub counterclockwise until the ribbon
becomes tight and runs wrinkle-free through the print mechanism.
7 Load media.
8 Turn the printhead lift lever clockwise to lower the printhead. The
printer performs the action defined by the Head Down Action setting.
9 Press the Print button to advance the media.
10 Close the media cover.
Print a test label after you have loaded media and ribbon to verify that you
have installed everything correctly and also to get some important
information about your printer. The way you print a test label is slightly
different between the full touch and the icon printer. Please use the
procedure for your printer.
Chapter 2 – Set Up the Printer
37
Advertisement
Table of Contents
