Black Mark Sensor Assembly - Honeywell PC42d Service & Repair Manual

TITLE
PC42d Service Repair Manual

Black Mark Sensor Assembly

OPERATION:
Tools Required
Description
Parts Required
Item Part Number
1 50131331-001FRE
Black Mark Sensor Removal
1. Remove top and bottom enclosure. Refer to Top/Bottom Enclosure Assembly Section
2. Disconnect black mark sensor cable from MLB. See Figure 9.
3. Push the latching tab and slide the black mark sensor assembly toward the right of the chasis
4. Pull the black mark sensor assembly through the opening. See Figure 10.
Slide
Direction
Figure 11 – Black Mark Sensor Assembly Removal
Model DOCUMENT NO.
L3-GLBL-RPR-4260
PC42d
(Rev A)
Description
FRE, Assy, Black Mark Sensor
Figure 9 – Black Mark Sensor Connector
Latching
Tab
PAGE
Page 15 of 25
Opening
Black Mark Sensor Assembly
L3-GLBL-RPR-4260 (Rev A)
Qty
1
1