Honeywell ADEMCO MX8000 Installation And Operation Manual page 100

MX8000-3EX Installation and Operation Guide
4. Press the or
5. When the desired setting is flashing press
6. To exit press .
How to Set FBII Out
1. Follow the procedures in Section 5.4.2.
6
2. Press for Ademco Auto Opt. menu (see Figure 5–20).
3. Press
The display Flashes on the FBI= field.
4. Press the or
5. When the desired setting is flashing press
6. To exit press .
How to Set Pulse Extended
1. Follow the procedures in Section 5.4.2.
2. Press 6 for Ademco Auto Opt. menu (see Figure 5–20).
3. Press
The display Flashes on the Pls= field.
4. Press the or
5. When the desired setting is flashing press
6. To exit press .
How to Set Extended Output
Note: This field will only be active when the Pulse Extended option above has been set to Extended.
1. Follow the procedures in Section 5.4.2.
2. Press 6 for Ademco Auto Opt. menu (see Figure 5–20).
3. Press
The display Flashes on the ExtOut= field.
4. Press the or
5. When the desired setting is flashing press
6. To exit press .
5–46
button to change the option from HiSpeed to Normal or vice versa.
ENTER
.
button to change the option from S/Fast to LAR300 or vice versa.
ENTER
.
button to change the option from Extended to Not Extended or vice versa.
ENTER
.
button to change the option from High Speed to 4/2 or vice versa.
ENTER
.
MENU
.
MENU
.
MENU
.
MENU