System Restart; Figure 4-10: Setting Time And Date Program Sequence; Figure 4-11: System Restart Display - Honeywell ADEMCO MX8000 Installation And Operation Manual

MX8000-3EX Installation and Operation Guide
Set Time and Date
1. Press the Menu
button.
2. Press the 4 button.
3. Set the Hour (1 to 12).
The field to be
changed flashes.
Press the Enter or
> button to advance.
4. Set the Minutes. The
field to be changed
flashes.
Press the Enter or
> button to advance.
5. Set time to AM or PM.
The field to be
changed flashes.
Press the Enter or
> button to advance.
6. Set the Month.
The field to be
changed flashes.
Press the Enter or
> button to advance.
4.6.7

System Restart

System restart allows the operator or
installer to restart the receiver. An installer
has the option to set the receiver back to
factory default settings, while an operator
can only restart the receiver.
Note: The time and date set in the receiver
will be saved. However, all of the call history
will be lost.
Follow These Steps to restart the receiver:
Note: All messages must be acknowledged before a system restart procedure can be performed. If all messages
are not acknowledged, cycle the receiver's power to restart the system. If the power is cycled all
unacknowledged messages will be lost.
1. Log on to the receiver (see Section 4.4.4 for log on procedure).
ENTER
2. Press the
MENU
5
3. Press for System Restart.
The display reads
4. Press the or
4–10
Time: 12:00AM
Date: 01/01/01
<Hour 1 to 12> <=Exit>
Time: 12:00AM
Date: 01/01/01
<Minute 0 to 59>
Time: 12:00AM
Date: 01/01/01
<Change AM/PM>
Time: 12:00AM
Date: 01/01/01
<Month 1 to 12>
Figure 4–10: Setting Time and Date Program Sequence
button to view the main menu items.
Do you wish to
shutdown & restart
system? No
button to toggle No to Yes.
Time: 12:00AM
Date: 01/01/01
<Day 1 to 31>
Time: 12:00AM
Date: 01/01/01
<Year 00 to 99>
Time: 12:00AM
Date: 01/01/01
Press ENTER at exact
time <<= to Cancel>
<Installer Menu>
5=System Restart
6 Printer Menu
7 Program Menu
Figure 4–11: System Restart Display
7. Set the Day.
The field to be
changed flashes.
Press the Enter or
> button to advance.
8. Set the Year (0 to 99).
The field to be
changed flashes.
Press the Enter or
> button to advance.
9. Press Enter button at
the correct time to
synchronize with.
­
ENTER
MENU
¯