Table of Contents
Advertisement
EXAMPLE OF THE EVENT PRINTOUT
For this example example, a yes answer was entered in the event format options for Date/Time, Format Type, Reference
Number, Call Separator, and Device Number.
Example of Print in Normal Mode
05/25/2004 02:53:37PM
Device #: 1-34 Format #: 50 Reference #: 62
Account #: 1000
[New] Restore-Fire Alarm ID# 001 Group# 01 R110
-------------------------
05/25/2004 02:54:03PM
Device #: 1-34 Format #: 50 Reference #: 64
Account #: 1000
[New] Restore-Fire Alarm ID# 001 Group# 01 R110
-------------------------
Example of Print in Condensed Mode
05/25/2004 02:53:37PM D#:1-34 F#:50 Ref#:62 A#: 1000 [New] Restore-Fire Alarm ID# 001
Group# 01 R110
-------------------------
05/25/2004 02:54:03PM D#:1-34 F#:50 Ref#:64 A#: 1000 [New] Restore-Fire Alarm ID# 001
Group# 01 R110
-------------------------
← ...................................................................Printer Margins ....................................................................... →
In the above Condensed Print example: D# = Device Number, F# = Format Type Number, Ref# =
Reference Number, A# = Account Number,
7. When the equal sign highlights each option press
print) or N (don't print).
Note: These settings are saved to flash memory.
8. Press
to exit menu.
4.6.8.3
Configure Printer
Depending on the printer you are using it may require that this be set to either carriage return or carriage
return with a line feed.
Follow these steps to configure the printer:
1. Log on to the receiver (see Section 4.4.4 for log on procedure).
ENTER
2. Press the
MENU
6
3. Press
for the printer menu. (See Figure 4–12.)
3
4. Press
for configure printer menu items.
The display will be flashing on the line terminator field.
5. Press the
or
6. When the desired setting is flashing press
The display will now flash on the offline time field.
7. Enter the desired time (from 01-99 seconds).
ENTER
8. Press
.
MENU
The display will now flash on the switch delay time field.
button to view the main menu items.
button to toggle between CR or CRLF. (See Table 4–6.)
ENTER
or
MENU
ENTER
.
MENU
Section 4 – Operation
to toggle the setting between Y (yes
4–15
Advertisement
Table of Contents
Troubleshooting
