Table 5-2: General Options Items And Description - Honeywell ADEMCO MX8000 Installation And Operation Manual

The below table is organized into the order that menu items are displayed when General Options has been
selected from the Program Menu. The first column reflects the first menu displayed, followed by the
subsequent menu displays based on the item selected. For example, if on the General Options screen you
select Operation Mode, the next screen will allow the selection of Manual, Automatic, or Log Only.
General Options
Level 1 Choices
Items
Manual
Operation Mode
Automatic
Log Only
Language
Time Display
Date Format
Daylight Savings
ITI (Edit Options)
Display Options
FMT
(Edit Format
options)
Table 5–2: General Options Items and Description
Level 2 Choices
English
Español
AM/PM
24 Hour
M/D/Y
D·M·Y
Y-M-D
Yes
No
Attempts
CPU Time
CPU Type
Panel Rev
Arming Level
FSK1
BFSK
SIA
CID
PULSE
Level 3 Choices
See Section 5.3.1 for additional
information on Operation Modes.
See 5.3.2.1.
Not available at this time
AM/PM is used for 12-hour time clock
displays. See 5.3.2.2.
M = month, D = day, and Y = year.
See 5.3.2.3.
DST Change Hour See 5.3.2.4.
Start Month
Start Week
End Month
End Week
Yes Affects printer output for ITI calls only.
No
Yes
No
Yes
No
Yes
No
Yes
No
Code If "English" is selected then the printer
and VFD output for calls of these
English (default)
formats will be text descriptions. If
Code (default)
"Code" is selected then the printer and
English
VFD output for calls of these formats
will be the Code and Zone numbers.
Code If "English" is selected, the printer and
VFD output will be text. If "Code" is
English (default)
selected then the printer and VFD will
display the SIA codes followed by zone
or other information.
Code (default) This option only affects the ADEMCO
8000 automation protocol output. If
English
"English" is selected each event will be
sent to the automation as two SIA
events; the first with the two digit Group
number and the second with the three
digit ID number. If "Code" is selected,
each event is sent as eleven digits; two
digits Message type, one-digit Event
Qualifier, three-digit Event Code, two-
digit Group Number, and three-digit ID
number.
0 .. 9 Digits 0 through 9.
0 .. F (default) Digits 0 through 9 and A through F.
Section 5 – Programming
Comments
5–3