Honeywell ADEMCO MX8000 Installation And Operation Manual page 162

MX8000-3EX Installation and Operation Guide
Program Mode
Choices
Options
MX8000–
Line Device LC3
Menu 3 Line
(continued) (con-
tinued)
A–6
Table A–1: Programming Quick Chart
Choices Choices
BFSK Auto
3/1 Restore
Ademco 4/2 Out
Auto Opt
FBI
Pulse Extended
Edit Line
+ Extended Out
Line #
Transmit Gain
(con-
Receive Gain
tinued)
CID Monitor
Line Gain
Opt
CID Gain
On Hook Gain
Ringer Imped
Use Choose
Defaults Device(s) #
Copy
Copy Device # of
Device(s)
Existing Source Device
Clear
Device #
Device(s)
View Device #
Device(s)
(cont'd)
Choices Choices
HiSpeed or 4/2
HiSpeed or 3/1
Normal or HiSpeed
S/Fast or LAR300
Extended or Not Ext.
HiSpeed or 4/2
–3 to –14dB
0 to 12dB in 3dB steps
Norm, Pream, DTMF, or
Marks
–6 to 7dB in steps
2 to 7dB in steps
Hi or Sy
Choose the target
Device(s) #.
Comments
See Section 5.4.2.6 for details
See Section 5.4.2.7 for details.
Choose Device(s) # that you wish to be
programmed to factory defaults.
Copy the programming of one Device
(source) and paste it into one or several
(target) Device(s).
See Section 5.4.4 for details.
See Section 5.4.5 for details.