Table 8-43: Panel Type Characters - Honeywell ADEMCO MX8000 Installation And Operation Manual

Field Identifier
V
G
D
T
N
Z
U
K
S
C
8.10.3.2 Panel Type Characters
The following table lists the characters used for panel types and which panel they refer to:
Character
0 Unknown type
3 SX-III or SX-IVA
4 SX-IVB
5 SX-V
9 FonSafe
A Commander
B SX-V Special
C Magnetic card reader
D Euro Commander
E Security Pro 4000
K HaborGard
M UltraGard
N Network Security
P Pin Point
R RF Commander
S Commander 2000 or LifeGard
T CareTaker +
V Protector
Z Nutone
Table 8–42: Information Field Identifiers (cont'd)
Description
Panel type and revision.
Group and attribute information.
Date of report.
Time of report
Reference number.
Zone number.
User number.
Dealer key numbers. For Commander 2000
only.
CPU sub-unit number
Condition code indicating the nature of the
reported message. See Table 8–28.
Table 8–43: Panel Type Characters
Panel Type
Section 8 – Automation Communication Formats
Acceptable Values
One panel type code byte followed
by a 4-digit revision number.
See Table 8–43.
Contact ITI for group and attribute
information.
In mmdd format, where mm =
month, and dd = day.
In hhmm format, where hh = hour,
and mm = minutes.
0001-9999. See also Section 4.6.3.
One to four alphanumeric
characters.
See Table 8–38 for acceptable
values.
Values from 00-99.
Values from 0-9
See Table 8–28for condition code
values.
Character Panel Type
a 3/1
e 3/1 extended
i 4/1
m 4/2
r Radionics BFSK
s SIA DSC
t Contact ID
v ADEMCO TouchTone
w Acron TouchTone
x Westec TouchTone
y ADEMCO DTMF 4/2
z ADEMCO DTMF 4/1
# ADEMCO High Speed (SIA D1)
$ FSK 0
% FSK 1
& FSK 2
( FBII 4/3/1
8–35