Honeywell ADEMCO MX8000 Installation And Operation Manual page 85

Select Line
Device Device
Type Menu Choice
MX8000–
LC3 Edit Line Line #
3 Line (cont'd) (cont'd)
(cont'd)
Table 5–11: Line Device Menu Options (cont'd)
Choice Choice
Caller ID
Misc. Line
Options
(cont'd) Billing Delay
Hunt Group
Ring
Options
Call Hang-
up
Choice Default
✔
Yes
No
Y (Yes)
✔
N (No)
00-99 00
Min Ring (15-
40
99)
Max Ring
060
(015-100)
Ring Off
4000
(1500-8000)
Min Ring Off
450
(100-800)
Ring Error
2200
(0800-4400)
Min # Ring
Periods (01- 05
20)
60-180 sec 120 sec
Section 5 – Programming
Comments
Caller ID to
Automation: When
enabled, Caller ID
information is output to
the automation system
only in the event that
no alarm data is
received from a
security system control
panel.
Caller ID to Printer
Ports: When enabled,
Caller ID information is
output to the printer
port(s) for every call
received at the time
that the Caller ID
information is available
from the Public
Switched Telephone
Network (normally
between the first and
second ring.) This
option should only be
used when connected
to a parallel or serial
printer or equivalent.
Initiates a 2-second
delay at the start of
each call before the
handshake delay.
See page 5–42 for
more information.
Allows multiple line
cards to report under
the same group
number to the
automation software.
See page 5–43 for
more information.
Sets the maximum
amount of time that a
call can last before the
receiver hangs up on
the call if an event is
not in progress. See
page 5–44 for details.
5–31