Local Bus Interrupter Status Register (Bits 24-31) - Motorola MVME172 Programmer's Reference Manual

VMEchip2

Local Bus Interrupter Status Register (bits 24-31)

2
ADR/SIZ
BIT
NAME
OPER
RESET
2-78
31 30 29
ACF AB SYSF
R R
0 PSL 0 PSL 0 PSL
This register is the local bus interrupter status register. When an interrupt
status bit is high, a local bus interrupt is being generated. When an interrupt
status bit is low, a local interrupt is not being generated. The interrupt
status bits are:
TIC1 Tick timer 1 interrupt.
TIC2 Tick timer 2 interrupt
VI1E VMEbus IRQ1 edge-sensitive interrupt.
PE Not used on MVME172.
MWP VMEbus master write post error interrupt.
SYSF VMEbus SYSFAIL interrupt.
AB Not used on MVME172.
ACF VMEbus ACFAIL interrupt.
$FFF40068 (8 bits of 32)
28 27
MWP PE
R R R
0 PSL 0 PSL
Computer Group Literature Center Web Site
26 25 24
VI1E TIC2 TIC1
R R R
0 PSL 0 PSL 0 PSL