Siemens SINUMERIK 828D Operating Manual page 831

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Indexing angle: After the first hole has been drilled, all additional positions are

approached at this angle (only for pitch circle).

Positive angle: Additional positions are rotated in counterclockwise direction.

Negative angle: Additional positions are rotated in clockwise direction.

Number of positions on circle

Working with a B axis (only 840D sl)

16.6 Position pattern

Sinumerik 840d sl