Siemens SINUMERIK 828D Operating Manual page 681

Further parameters
If you have set up unique cutting edge numbers, these are displayed in the first column.
Column heading
D no.
SN
SC
You use the configuration file to specify the selection of parameters in the list.
References
Information on the configuration and setting up of the tool list can be found in the following
references:
SINUMERIK Operate (IM9) / SINUMERIK 840D sl Commissioning Manual
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Meaning
Unique cutting edge number
Cutting edge number
Setup offsets
Display of the existing setup offsets
Software option
In order to be able to manage the parameter spindle direction of rotation,
coolant and tool-specific functions (M1-M4), you require the "Shop-
Mill/ShopTurn" option.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Tool management
12.5 Tool list
681