Relocating A Multitool - Siemens SINUMERIK 828D Operating Manual

12.15.8

Relocating a multitool

Multitools can be directly relocated within magazines to another magazine location, which
means that you do not have to unload multitools with the associated tools from the magazine
in order to relocate them to a different location.
When you are relocating a multitool, the system automatically recommends an empty
location. You may also directly specify an empty magazine location.
Procedure
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
1. Select the "Parameter" operating area.
2. Press the "Magazine" softkey.
3. Position the cursor at the multitool that you wish to relocate to a
different magazine location.
4. Press the "Relocate" softkey.
The "... relocate from location ... to location ..." window is dis-
played. The "Location" field is pre-assigned with the number of
the first empty magazine location.
5. Press the "OK" softkey to relocate the multitool to the recom-
mended magazine location.
- OR -
Enter the required magazine number in the "...magazine" field
and the required magazine location number in "Location" field.
Note:
Please refer to the machine manufacturer's specifications.
Press the "OK" softkey.
The multitool with the tools is relocated to the specified magazine
location.
Tool management
12.15 Working with multitool
729