Sorting, Alarms, Faults And Messages - Siemens SINUMERIK 828D Operating Manual

14.4

Sorting, alarms, faults and messages

If a large number of alarms, messages or alarm logs are displayed, you have the option of
sorting these in an ascending or descending order according to the following criteria:
● Date (alarm list, messages, alarm log)
● Number (alarm list, messages)
As a consequence, for every extensive lists, you can obtain the required information faster.
Procedure
...
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
1. Select the "Diagnostics" operating area.
2. Press the softkey "Alarm list", "Messages" or "Alarm log" to display the
requested messages and alarms.
3. Press the "Sort" softkey.
The list of entries is sorted in ascending order according to date, i.e. the
most recent information is at the end of the list.
4. Press the softkey "Descending" to sort the list in a descending order.
The most recent event is shown at the beginning of the list.
5. Press the "Number" softkey if you wish to sort the alarm list or the list
with messages according to numbers.
6. Press the "Ascending" softkey if you wish to display the list in an as-
cending order.
Alarm, error and system messages
14.4 Sorting, alarms, faults and messages
789