Siemens SINUMERIK 828D Operating Manual page 496

Programming technology functions (cycles)
9.4 Milling
Parameters in the "Input complete" mode
G code program parameters
Input
PL Machining plane
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter
Machining
surface
(only for ShopTurn)
Position
(only for ShopTurn)
(only for ShopTurn)
Reference point
Machining
496
Complete
•
mm
mm
*
Description
Face C
•
Face Y
•
Peripheral surface C
•
Peripheral surface Y
•
At the front (face)
•
At the rear (face)
•
Outside (peripheral surface)
•
Inside (peripheral surface)
•
Clamp/release spindle (only for end face Y/peripheral surface Y)
The function must be set up by the machine manufacturer.
Position of the reference point:
(lefthand edge)
•
(center)
•
(righthand edge)
•
∇ (roughing)
•
∇∇ (pre-finishing)
•
∇∇∇ (finishing)
•
∇∇∇ base (base finishing)
•
∇∇∇ edge (edge finishing)
•
Chamfering
•
ShopTurn program parameters
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cut-
ting rate
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
mm/min
mm/tooth
rpm
m/min
Unit
Turning