Siemens SINUMERIK 828D Operating Manual page 553

Procedure
Parameters, G code program
PRG Name of the program to be generated
PL Machining plane
Milling direction
Climbing
•
Conventional
•
RP Retraction plane
SC Safety clearance
F Feedrate
parameters
Machining
Machining
surface
(only for ShopTurn)
(only for ShopTurn)
TR
D
Z0
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
1. The part program or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2. Press the "Milling", "Contour milling" and "Spigot resid. mat." softkeys.
The "Spigot Res. Mat." input window opens.
3. For the ShopTurn program, press the "All parameters" softkey if you
want to enter additional parameters.
mm
mm
mm/min
Description
The following machining technologies can be selected:
∇ (roughing)
•
Face C
•
Face Y
•
Face B
•
Peripheral surface C
•
Peripheral surface Y
•
Clamp/release spindle (only for end face Y/B and peripheral surface Y)
The function must be set up by the machine manufacturer.
Reference tool Tool, which is used in the "stock removal" machining step. This
is used to determine the residual corners.
Cutting edge number
Reference point in tool axes Z
Programming technology functions (cycles)
Parameters, ShopTurn program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cut-
ting rate
9.5 Contour milling
mm/min
mm/tooth
rpm
m/min
Unit
mm
553