Display/Edit The Multi-Channel Functionality In The "Machine" Operating Area; Running-In A Program - Siemens SINUMERIK 828D Operating Manual

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Display/edit the multi-channel functionality in the "Machine" operating area

You have various options to run-in programs.

Running-in channel-by-channel

Select the channels that you wish to process using the "Running-in" function in the "Program

control" window. The channels not selected here are brought into the "Program test (PRT)"

state. As a consequence, the channels are only calculated, but are not processed.

No M and auxiliary functions or tool functions are output. Spindle commands are only output

for selected spindles.

Running-in spindle-by-spindle

Only machining operations are executed for the spindle selected under program control /

running-in. When programming, using the block formation, allocate the corresponding

machining operations to a spindle.

When generating a block, a complete block can be assigned to a spindle. For the case that

the block is not executed, as the specified spindle should not be considered when running in,

then it is possible to temporarily activate what is known as an "Addit. run-in code".

Precondition

● Multi-channel machine

● You have selected the multi-channel view via "Settings for channel functionalities".

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Software options

You require the "programSYNC" option for cross-channel program control.

Select the "AUTO" operating area.

Press the "Prog. ctrl." softkey.

The "Program control - General" window appears on the screen.

Press the "Run-in" softkey.

The "Program control - Running-in" window is displayed.

Select the channels and the associated spindles to run-in the program.

Multi-channel machining

10.2 Multi-channel support

Sinumerik 840d sl