Siemens SINUMERIK 828D Operating Manual page 545

Clamping the spindle
For ShopTurn, the "Clamp spindle" function can be set up by the machine manufacturer.
See also
Clamping the spindle (Page 247)
Procedure
Parameters, G code program
PRG Name of the program to be generated
PL Machining plane
Milling direction
Climbing
•
Conventional
•
RP Retraction plane
SC Safety clearance
F Feedrate
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Software option
For removing residual stock, you require the option "residual stock detection
and machining".
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. The part program or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2. Press the "Milling", "Contour milling" and "Pocket resid. mat." softkeys.
The "Pocket Res. Mat." input window opens.
3. For the ShopTurn program, press the "All parameters" softkey if you
want to enter additional parameters.
mm
mm
mm/min
Programming technology functions (cycles)
Parameters, ShopTurn program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cut-
ting rate
9.5 Contour milling
mm/min
mm/tooth
rpm
m/min
545