Siemens SINUMERIK 828D Operating Manual page 682

Tool management
12.5 Tool list
Icons in the tool list
Icon/
Marking
Tool type
Red "X"
Yellow triangle pointing down-
ward
Yellow triangle pointing upward
Green frame
Magazine/location number
Green double arrow
Gray double arrow
Red "X"
Procedure
See also
Displaying tool details (Page 707)
Changing the cutting edge position or tool type (Page 717)
682
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the "Tool list" softkey.
The "Tool List" window opens.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tool tip will
provide a brief description.
The tool is preselected.
The magazine location is positioned at the change
position.
The magazine location is positioned at the loading
position.
The magazine location is disabled.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning