Alarm, error and system messages
14.3 Displaying messages
14.3
Displaying messages
PLC and part program messages may be issued during machining.
These message will not interrupt the program execution. Messages provide information with
regard to a certain behavior of the cycles and with regard to the progress of machining and
are usually kept beyond a machining step or until the end of the cycle.
Overview of messages
You can display all issued messages.
The message overview contains the following information:
● Date
● Message number
is only displayed for PLC messages
● Message text
Procedure
788
1.
Select the "Diagnostics" operating area.
2.
Press the "Messages" softkey.
The "Messages" window appears.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning