Siemens SINUMERIK 828D Operating Manual page 276

Creating a ShopTurn program
8.18 Example: Standard machining
4. Input of finished part with contour computer
276
6.7 Z 0 abs
6.8 X 60 abs
7. Press the "Accept" softkey.
It is only necessary to enter the blank contour when using a pre-
machined blank.
Blank contour
1. Press the "Cont. turn." and "New contour" softkeys.
The "New Contour" input window opens.
2. Enter the contour name (in this case: Cont_2).
The contour calculated as NC code is written as internal subprogram
between a start and an end marker containing the entered name.
3. Press the "Accept" softkey.
The "Starting point" entry field opens.
4. Specify the contour starting point of the contour.
X 0 abs
5. Press the "Accept" softkey.
Z 0 abs
Z 0 abs
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning