Siemens SINUMERIK 828D Operating Manual page 421

Procedure
Parameters, G code program
PRG Name of the program to be generated
PL Machining plane
RP Retraction plane – (only for
longitudinal machining di-
rection)
SC Safety clearance
F Feedrate
CON Name of the updated blank contour for residual
material machining (without the attached char-
acter "_C" and double-digit number)
Residual With subsequent residual material removal
material
Yes
•
No
•
CONR Name to save the updated unmachined-part
contour for residual material removal - (only
"Yes" for residual material removal)
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
1. The part program or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2. Press the "Contour turning" softkey.
3. Press the "Grooving residual material" softkey.
The "Grooving residual material" input window is opened.
mm
mm
*
Programming technology functions (cycles)
Parameters, ShopTurn program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant
cutting rate
9.3 Contour turning
mm/rev
rpm
m/min
421