Siemens SINUMERIK 828D Operating Manual page 561

Tool
To avoid collisions, you can use the 5-axis transformation (software option) to define the
position of the tool tip during swiveling.
● Correct
The position of the tool tip is corrected during swiveling (tracking function).
● No correction
The position of the tool tip is not corrected during swiveling.
Procedure
G code program parameters
PL Machining plane
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. The part program or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2. Select the "Miscellaneous" softkey.
3. Press the "Swivel plane" softkey.
The "Swivel plane" input window opens.
4. Press the "Basic setting" softkey if you wish to reestablish the initial
state, i.e. you wish to set the values back to 0.
This is done, for example, to swivel the coordinate system back to its
original orientation.
Programming technology functions (cycles)
9.6 Further cycles and functions
ShopTurn program parameters
T Tool name
D Cutting edge number
Feedrate
S / V Spindle speed or constant cut-
ting rate
mm/min
mm/rev
rpm
m/min
561