Editing A Shopturn Multi-Channel Program - Siemens SINUMERIK 828D Operating Manual

Multi-channel machining
10.2 Multi-channel support
Procedure
10.2.5.3

Editing a ShopTurn multi-channel program

Precondition
The "programSYNC" option is set.
Procedure
Program header with multi-channel data
In the program header, set the parameters, which are effective for the complete program.
You have the following options to save cross-program data:
● You can enter values in a common data set for the main and counterspindle
● You can enter values for the main and/or counterspindle
628
1. The double editor is opened and the cursor is positioned in the G
code program.
2. Press the "Misc." and "Blank" softkeys.
The "Blank Input" window opens.
3. Select the desired blank and enter the corresponding values.
4. Press the "Accept" softkey.
1. Position the cursor in the "Workpieces" folder on a job list and press the
"Open" softkey.
Note:
If the cursor is located on a workpiece, then a search is made for a job
list with the same name.
The "Job list ..." window opens and the program assignment to the
channels is displayed.
2. Press the "OK" softkey.
The programs are displayed next to one another in the editor.
3. Open the program header if you wish to define cross-program entries.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning