Working in manual mode
4.4 Positioning axes
4.4
Positioning axes
In order to implement simple machining sequences, you can traverse the axes to certain
positions in manual mode.
The feedrate / rapid traverse override is active during traversing.
Procedure
116
1.
If required, select a tool.
2.
Select the "JOG" operating mode.
3.
Press the "Positions" softkey.
4.
Enter the target position or target angle for the axis or axes to be trav-
ersed.
5.
Specify the desired value for the feedrate F.
- OR -
Press the "Rapid traverse" softkey.
The rapid traverse is displayed in field "F".
6.
Press the <CYCLE START> key.
The axis is traversed to the specified target position.
If target positions were specified for several axes, the axes are trav-
ersed simultaneously.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning