Siemens SINUMERIK 828D Operating Manual page 660

Multi-channel machining
10.2 Multi-channel support
Parameters
Synchronization function
Coordinate
system
XP
ZP
Complete transfer
function
Coordinate
system
XP
ZP
Flush chuck
DIR
S
α1
Z1
ZR
FR
Fixed
stop
660
Description
Synchronizes with the counter-spindle in the other channel.
MCS
•
The park position is specified in the machine coordinate system. Teaching
in the park position and angular offset is only possible in the machine coor-
dinate system.
Workpiece coordinate system
•
The park position is specified in the workpiece coordinate system.
Park position of tool in X direction (abs)
Park position of tool in Z direction (abs)
Gripping
MCS
•
The park position is specified in the machine coordinate system. Teaching
in the park position and angular offset is only possible in the machine coor-
dinate system.
WCS
•
The park position is specified in the workpiece coordinate system.
Park position of tool in X direction (abs)
Park position of tool in Z direction (abs)
Flush counter-spindle chuck
Yes
•
No
•
Direction of rotation
Spindle rotates clockwise
•
Spindle rotates counter-clockwise
•
Spindle does not rotate
•
Spindle speed – (only when the spindle rotates)
Angular offset
Transfer position (abs.)
Position, feedrate reduction (abs or inc)
Position from which a reduced feedrate is used.
Reduced feedrate
Travel to fixed stop
Yes
•
The counter-spindle stops at a defined distance away from transfer position
Z1 and then traverses with a defined feedrate up to the fixed stop.
No
•
The counter-spindle traverses to the transfer position Z1.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Unit
mm
mm
mm
mm
rev/min
Degrees
mm/rev
Turning