Function Generator Physical Address / Fg Phys Address; Function Generator Physical Address Reference Value; Function Generator Drive Number / Fg Drive Number; Function Generator Output Signal Integer Number Scaling - Siemens SINAMICS G150 Manual

p4812

Function generator physical address / FG phys address

CU_G130_DP, Can be changed: U, T
CU_G130_PN,
Data type: Unsigned32
CU_G150_DP,
P-Group: Trace and function generator
CU_G150_PN
Not for motor type: -
Min
0
Description: Sets the physical address where the function generator is to be connected.
Dependency: Only effective when p4810 = 99.
p4813 Function generator physical address reference value / FG phys addr ref
CU_G130_DP, Can be changed: U, T
CU_G130_PN,
Data type: FloatingPoint32
CU_G150_DP,
P-Group: Trace and function generator
CU_G150_PN
Not for motor type: -
Min
1.00
Description: Sets the reference value for 100 % for referred inputs.
Dependency: Only effective when p4810 = 99.
p4815[0...2]

Function generator drive number / FG drive number

CU_G130_DP, Can be changed: U, T
CU_G130_PN,
Data type: Unsigned16
CU_G150_DP,
P-Group: Trace and function generator
CU_G150_PN
Not for motor type: -
Min
0
Description: Selects the required drive where the function generator is to be connected.
Index: [0] = First drive for connection
[1] = Second drive for connection
[2] = Third drive for connection
Dependency: Only effective when p4810 = 1, 2, 3, 4 or 5.
Note: For the function generator, only type SERVO, VECTOR or DC_CTRL type drives can be used.
p4816 Function generator output signal integer number scaling / FG outp integ scal
CU_G130_DP, Can be changed: U, T
CU_G130_PN,
Data type: Integer32
CU_G150_DP,
P-Group: -
CU_G150_PN
Not for motor type: -
Min
-2147483648
Description: Sets the scaling for the integer number of the output signal for the function generator.
Dependency: Refer to: r4805, r4817
Note: The parameter can only be changed in the following operating states:
r4805 = 0, 4, 6
SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
4294967295
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
1000000.00
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
65535
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
2147483647
2 Parameters
2.2 List of parameters
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
0
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
1.00
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
0
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
677