Bosch DCN Next Generation Installation And User Instructions Manual page 70

DCN NG | Installation and User Instructions | Section 3 | Central Control Equipment
8.5.2 Navigate through the menu
Operating the menu is always a sequence of alternating
turns and pushes:
Turn the button to:
• Cycle through the menu items within a menu
(the menu item number and title on the first line is
blinking).
• Go to a settable option within a menu item
(a blinking cursor moves through the menu screen).
• Cycle through the available values for a settable
option (the value is blinking).
Push the button to:
• Confirm a chosen menu item (the menu item
number and title stop blinking, a blinking cursor
appears).
• Go to a submenu (the submenu item character starts
blinking).
• Confirm the selection of a settable option (the cursor
disappears, the option value starts blinking).
• Confirm a selected value for a settable option
(the value stops blinking, the cursor appears again).
main menu
item number
figure 8. 1 5: Menu item screen elements
Bosch Security Systems | 2004-03 | 9922 141 70521en
sub-menu
item character
3A Nom. Level...
menu item title
After 3 minutes of inactivity, the display automatically
switches back to the first item of the main menu
(Unit Name).
Each menu is identified by a number (for the main
menu) or by a number plus a character (for the
submenus). The item identification can be found at the
start of the first line and is used to navigate to and from
submenus.
Most menu items have one or more settable
configuration options. The value of an option can be
changed by selecting a value from a list of available
values.
three dots indicate
that the menu item
has a sub-menu
en | 70
3A Nom. Level
Output 1 -14dBV
option values